Great for cleaning out Fryers
Made in USA

The post Fryer Oil Collection Wand with Filter and Valve appeared first on Alternative Fuel Mecca.

A flexible, oil-resistant multipurpose hose built for demanding plant and shop service. The Plant Master™ Xtreme™ 250 handles air, water, petroleum-based oils, and lubricants with excellent weather/ozone durability, making it a dependable choice for general industrial transfer. Recommended for petrol, kerosene, and fuel-oil transfer (observe temperature guidance below). (Gates)

Quick Highlights

• Working pressure: 250 psi (1.72 MPa / 17 bar) with 3:1 design factor.
• Temperature range: −40°F to +212°F (−40°C to +100°C) in continuous service; fuels recommended to +120°F max.
• Oil resistance: Tube rated ARPM Class A (high oil resistance).
• Non-conductive: > 1 MΩ per inch when new* (see note on storage/use).
• Excellent flexibility and weather/ozone resistance.

*Electrical resistance can change with storage and use; verify in your application.

Typical Uses

• General plant service for air, water, and multi-purpose transfer
• Petroleum oils and lubricants handling
• Fuel transfer (petrol, kerosene, fuel oil) — observe +120°F fuel limit

Construction

• Tube: Nitrile (NBR), ARPM Class A oil resistance, black.
• Reinforcement: Synthetic textile braid.
• Cover: Modified nitrile, ARPM Class B; red, standard cover, weather/ozone resistant.

Performance & Ratings

• Max working pressure: 250 psi (17 bar / 1.72 MPa)
• Min burst pressure: 900 psi
• Vacuum rating: 10 in Hg
• Min bend radius: 9.84 in (250 mm)
• Temperature range: −40°F to +212°F (−40°C to +100°C) continuous
• Electrical: Non-conductive > 1 MΩ per inch when new*
• Design factor: 3:1 (working : burst)

*Storage and use may adversely affect electrical resistance. Verify before use where non-conductivity is critical.

Dimensions (This Variant)

• Inside diameter: 1.25 in (31.8–32 mm)
• Outside diameter: 1.75 in (~44.5 mm)
• Standard length: 300 ft (91 m)
• Approx. weight: ~1.0 lb per foot (as listed per pack; verify before freight calculations)

Part & Identification

• Product family: Plant Master™ Xtreme™ 250
• Description: PLANT MAS XTRM 250 1-1/4″ x RL91 (300 ft)
• Product # (Gates): 3205-00049
• Part # (label): 1-1/4X300 PLANT XTREME 250
• UPC: 072053662849 (Gates)

Coupling Guidance

Compatible with long-shank styles, Tri-Lokt, interlocking (ground-joint and washer-joint), Power Crimp™ couplings, and GLX® (G44 Series). Always verify assembly compatibility and pressure ratings by size.

Compliance / Notes

• ARPM ratings: Tube Class A (high oil resistance); Cover Class B.
• Non-conductive as manufactured; confirm in service due to possible change with age, storage, and media.
• Fuel transfer recommendation to +120°F max.
• Images on the original page are illustrative and may not represent exact product markings.

Clean Spec Block (copy-paste friendly)

Plant Master™ Xtreme™ 250 — 1-1/4″ (ID) General-Purpose Hose, 300 ft

• Pressure: 250 psi WP (17 bar); 900 psi minimum burst; 3:1 design factor
• Vacuum: 10 in Hg
• Temp: −40°F to +212°F (−40°C to +100°C) continuous; fuels to +120°F
• ID/OD: 1.25 in (31.8–32 mm) / 1.75 in (44.5 mm)
• Bend radius: 9.84 in (250 mm)
• Tube: NBR, ARPM Class A, black
• Reinforcement: Synthetic textile
• Cover: Modified Nitrile, ARPM Class B, red, weather/ozone resistant
• Electrical: Non-conductive >1 MΩ/in (as new); verify before use
• Length: 300 ft (91 m)
• Weight: ~1.0 lb/ft (per pack listing)
• Part/UPC: 3205-00049 / 072053662849
• Couplings: Long-shank, Tri-Lokt, interlocking (ground-/washer-joint), Power Crimp™, GLX® (G44)
• Applications: Air, water, oils & lubricants; petrol/kerosene/fuel-oil transfer (to +120°F)
• Color: Red cover / black tube

If you want, I can also:

• Convert this into a WordPress product page (HTML block with schema.org Product markup).
• Add a comparison table vs. your own hose SKU.
• Generate a cut-sheet PDF with your branding and these specs.

The post Gates Plant Master Xtreme Petroleum Hose appeared first on Alternative Fuel Mecca.

• Excellent for suction & discharge of seawater, oil based mud, & other general purpose uses.

• Suitable for up to 50% aromatics.

• Designed for transfer of gasoline, oil & other petroleum based products where maximum flexibility is needed; excellent kink resistance.

• Excellent for suction & discharge of seawater, oil based mud, & other general purpose uses.

• Suitable for up to 50% aromatics.

The post Fuel and Oil Tank Transfer Hose 1.25″ appeared first on Alternative Fuel Mecca.

• Excellent for suction & discharge of seawater, oil based mud, & other general purpose uses.

• Suitable for up to 50% aromatics.

• Designed for transfer of gasoline, oil & other petroleum based products where maximum flexibility is needed; excellent kink resistance.

• Excellent for suction & discharge of seawater, oil based mud, & other general purpose uses.

• Suitable for up to 50% aromatics.

The post Fuel and Oil Tank Transfer Hose 1.5″ appeared first on Alternative Fuel Mecca.

Suction Hose: You get 30 feet of suction hose that has strong coils built in to prevent it from collapsing under vacuum.  This is what you need to quickly suck up oil.

Cam Locks – You’ll receive an array of male and female parts to arrange your hose accordingly.  There are two sets of camlock males that come off the pump, two sets of camlock female connections on the hose end, and another two male connections. This also comes with end caps and plugs so the oil won’t leak from the hose during movement.

2 x Type F

2 x Type C

2 x Type E

2 x DP Dust Plug

4 x End Cap

8 Hose Clamps

30′ High Quality Suction/Discharge Petroleum Transfer Hose(custom lengths available, just ask for a quote)

Depending on your application, you may also need pipe nipples and/or bushings, which are readily available at Home Depot, Lowes, Ace Hardware, and the like.

The post 30ft Aluminum Camlock Hose Kit appeared first on Alternative Fuel Mecca.

Cover: Corrugated Clear PVC

Temp. Range: -10 to 130 degrees F

Reinforcement: White PVC Helix

The post Oil Pump Vacuum Hose – 1.25 Inch appeared first on Alternative Fuel Mecca.

(33) Feet PVC Suction Hose

Tube: Clear PVC

Cover: Corrugated Clear PVC

Temp. Range: -10 to 130 degrees F

Reinforcement: White PVC Helix

(3)  Male Camlock E Couplings

(3) Female Camlock C Couplings

(1) Camlock Dust Plug

(1) Camlock Dust Cap

(8) Stanless Steel Band Clamps

Recommended Size for our Portable Pumps with 1.25″ Hose Barbs

The post Oil Pump Hose Kit – 1.25 Inch appeared first on Alternative Fuel Mecca.