Oil Cleaning Centrifuges Archives - Alternative Fuel Mecca Oil Transfer Pumps and Centrifuges Fri, 02 Oct 2026 19:54:31 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.11 https://alternativefuelmecca.com/wp-content/uploads/2015/05/recycle_oil.jpg Oil Cleaning Centrifuges Archives - Alternative Fuel Mecca 32 32 Oil Centrifuge Power Booster https://alternativefuelmecca.com/product/oil-centrifuge-power-booster/ Fri, 15 May 2015 02:42:41 +0000 https://alternativefuelmecca.com/?post_type=product&p=4669
  • Increases Speed
  • Provides a Better Clean
  • Bolts right in the Bowl

    • The post Oil Centrifuge Power Booster appeared first on Alternative Fuel Mecca.

    ]]>     The Power Booster adds efficiency to your centrifuge.   It gets the oil spinning prior to entering the bowl.  It also insures the new oil enters at the bottom of the bowl, thus having to work it’s way through the entire contents of the bowl before leaving the centrifuge.   It’s recommended.

    The post Oil Centrifuge Power Booster appeared first on Alternative Fuel Mecca.

    ]]>         Centrifuge Oil Pre Heater https://alternativefuelmecca.com/product/centrifuge-oil-pre-heater/ Fri, 15 May 2015 02:27:11 +0000 https://alternativefuelmecca.com/?post_type=product&p=4666
  • 120/230V
  • Super Efficient
  • Gives you the Best Clean Possible

    • The post Centrifuge Oil Pre Heater appeared first on Alternative Fuel Mecca.

    ]]>     Oil is cleaned better and more efficiently when it is hot, at least 150*F.   This efficient heating unit bolts right on to the centrifuge, and superheats the oil as it enters the centrifuge bowl.  It saves you from heating your entire feedstock.   This upgrade is strongly recommended.

    The post Centrifuge Oil Pre Heater appeared first on Alternative Fuel Mecca.

    ]]>         Basic Oil Centrifuge https://alternativefuelmecca.com/product/basic-oil-centrifuge/ Mon, 04 May 2015 18:41:27 +0000 https://alternativefuelmecca.com/?post_type=product&p=4561 Let the Machine Do The Work
    • Cleans Fine Particulates(<1 micron) from a Variety of Fluids, Proven Around the World with WVO and WMO Waste Oils.
    • Gravity Fed, Single Pass.  Send Oil Through Once and It's Clean
    • Available in 120V or 230V.  Centrifuge runs at 300W.
    • 3450 RPM Model [1300g]
    • Best Support and Warranty in the Industry!
    • Shipping October 2.  Pre-Order Now to Get in On this Batch and Save $100!
    • Brochure Download >

    The post Basic Oil Centrifuge appeared first on Alternative Fuel Mecca.

    ]]>     Oil_centrifuge_shipping_world

     

    • Centrifuges are Packed and Shipped within 2 Business Days

    • Weight is about 50lbs

    • Package is 20x14x16 inches

     

    wvo_centrifuge_oil_topThe Ultimate Oil Cleaning Machine

    Clean a Variety of Fluids – You’ll gain the ability to produce fuel quality oil from a variety of waste oils including waste motor oil, waste vegetable oil, ATF and hydraulic oil.

    Extract Dirt and Water – Remove particles and unwanted fluids with this powerful and effective tool,  processing up to 25 gallons/hour!

    Save Time – Automatically clean oil while watching football or playing with the kids

    Top Notch Service and Support – Gain access to remarkable customer support and an industry leading warranty

    centrifuge_oil_flow

    Additional Specifications:

    Cleaning Flow Rate: 5-25 gallons/hour(19-95 liters/hour)

    *Cleaning Rate depends on factors like heat and how dirty the oil is to begin with

    Overall Height: 18″

    Overal diameter: 18″

    Hose Fittings: 3/4″ hose barb fittings included

    Rated for Continuous Use

    Handles a variety of fluids – Water, diesel, WVO, Motor Oil, Biodiesel, ATF, Gear Oil, etc.

    Rated up to 400*F

    Motors run at 300W

    Bowls Are Cleaned By Stopping and Draining.  Once solids build up, the bowl is easily removed by one nut, and can be scraped or rinsed with anything safe for aluminum.

    Motors –

    All of our motors are now custom made in the US by a leading motor manufacturer in the world.   

    • *Sealed, high speed Bearings.  Good up to 10,000 RPM
    • *Double Sealed Shafts
    • *Factory Rated 20 Year Service Life
    • *Inverter Rated
    • *Cast Iron End Bells for Rigidity

    -Basic Model Motor

    • *3450 RPM
    • *150 Watts, 60Hz 120V
    • *.33 horsepower
    • *Pre-wired Plug and on/off switch included

    -Extreme Model Motor

    • *6000 RPM
    • *250 Watts, 60Hz 230V, 3 – phase *Note – 120V or 230V single phase controller included with purchase
    • *.33 horsepower
    • *Wiring not included

    Housing and Legs

    • *Durable Aluminum Construction
    • *Lifetime Warranty
    • *Oil Compatble – resistant to polymerization
    • *3/4″ Threaded Ports(hose barbs included)

    Rotor

    • *High Quality Aluminum Cast Rotor
    • *Includes 3 drain holes for contaminants
    • *22oz debris holding capacity
    • *Polished to perfection
    • *Go 100s of gallons without cleaning
    • *8 inch Diameter, 2 inch height
    • *Quick-release torque nut

    Seals and Hardware

    • *Viton Seals – good up to 400*F, Biofuel Safe
    • *Quality hardware
    • *Steel Fittings

    The post Basic Oil Centrifuge appeared first on Alternative Fuel Mecca.

    ]]>         Extreme Oil Centrifuge https://alternativefuelmecca.com/product/extreme-oil-centrifuge/ Sun, 03 May 2015 23:59:51 +0000 https://alternativefuelmecca.com/?post_type=product&p=4504 Let the Machine Do The Work
    • Cleans Fine Particulates(<1 micron) from a Variety of Fluids, Proven Around the World with WVO and WMO Waste Oils.
    • Gravity Fed, Single Pass.  Send Oil Through Once and It's Clean
    • Available in 120V or 230V.  Centrifuge runs at 250W.
    • 6000 RPM Variable Speed Model [3800g]
    • Best Support and Warranty in the Industry!
    • In Stock and Shipping Now!
    • Brochure Download >

    The post Extreme Oil Centrifuge appeared first on Alternative Fuel Mecca.

    ]]>     Oil_centrifuge_shipping_world

     

    • Centrifuges are Packed and Shipped within 2 Business Days

    • Weight is about 50lbs

    • Package is 20x14x16 inches

    wvo_centrifuge_oil_topThe Ultimate Oil Cleaning Machine

    Clean a Variety of Fluids – You’ll gain the ability to produce fuel quality oil from a variety of waste oils including waste motor oil, waste vegetable oil, ATF and hydraulic oil.

    Extract Dirt and Water – Remove particles and unwanted fluids with this powerful and effective tool,  processing up to 25 gallons/hour!

    Save Time – Automatically clean oil while watching football or playing with the kids

    Top Notch Service and Support – Gain access to remarkable customer support and an industry leading warranty

    centrifuge_oil_flow

    Additional Specifications:

    Cleaning Flow Rate: 5-25 gallons/hour(19-95 liters/hour)

    *Cleaning Rate depends on factors like heat and how dirty the oil is to begin with

    Overall Height: 18″

    Overal diameter: 18″

    Hose Fittings: 3/4″ hose barb fittings included

    Rated for Continuous Use

    Handles a variety of fluids – Water, diesel, WVO, Motor Oil, Biodiesel, ATF, Gear Oil, etc.

    Rated up to 400*F

    Motors run at 300W

    Bowls Are Cleaned By Stopping and Draining.  Once solids build up, the bowl is easily removed by one nut, and can be scraped or rinsed with anything safe for aluminum.

    Motors –

    All of our motors are now custom made in the US by a leading motor manufacturer in the world.   

    • *Sealed, high speed Bearings.  Good up to 10,000 RPM
    • *Double Sealed Shafts
    • *Factory Rated 20 Year Service Life
    • *Inverter Rated
    • *Cast Iron End Bells for Rigidity

    -Basic Model Motor

    • *3450 RPM
    • *150 Watts, 60Hz 120V
    • *.33 horsepower
    • *Pre-wired Plug and on/off switch included

    -Extreme Model Motor

    • *6000 RPM
    • *250 Watts, 60Hz 230V, 3 – phase *Note – 120V or 230V single phase controller included with purchase
    • *.33 horsepower
    • *Wiring not included

    Housing and Legs

    • *Durable Aluminum Construction
    • *Lifetime Warranty
    • *Oil Compatble – resistant to polymerization
    • *3/4″ Threaded Ports(hose barbs included)

    Rotor

    • *High Quality Aluminum Cast Rotor
    • *Includes 3 drain holes for contaminants
    • *22oz debris holding capacity
    • *Polished to perfection
    • *Go 100s of gallons without cleaning
    • *8 inch Diameter, 2 inch height
    • *Quick-release torque nut

    Seals and Hardware

    • *Viton Seals – good up to 400*F, Biofuel Safe
    • *Quality hardware
    • *Steel Fittings

    The post Extreme Oil Centrifuge appeared first on Alternative Fuel Mecca.

    ]]>