🚀 Move Thick Fluids Fast – Now with a 1.5 HP Farm Duty Motor! 🔧

In a professional shop, every minute counts. Slow oil transfers don’t just waste time—they impact your bottom line, delay job completion, and keep customers waiting. That’s revenue walking out your door.

Introducing the Heavy Duty 12 GPM Portable Oil Transfer Pump — now powered by a rugged 1.5 HP Farm Duty motor for superior performance and durability. This industrial powerhouse revolutionizes your oil transfer process.

Since 2009, Alternative Fuel Mecca has been supplying professional-grade equipment to shops nationwide. We understand the demands of daily operations, and we build pumps to keep up.

💡 What You Get

• Best Portable Pump for Viscous Fluids: Transfer 12 gallons per minute (empty a 55-gallon drum in ~5 minutes)
• Pump from a Distance: Self-priming design for immediate pumping.  Suction lift is 15′ and push height is 90′.
• Industrial Durability: Built for professional daily use
• Long-Term Reliability: Motor is built to last.  Easy seal replacement and servicing.
• Professional Technical Assistance and Extended Warranty Option

⚙️ Detailed Specifications

Overall Specs

• Dimensions: 17″ × 11″ × 7″
• Weight: 55 lbs
• Temperature Rating: Up to 375 °F
• Flow Rate:  12 GPM (heavy duty, thick fluids)
• Ports: 1″ NPT with hose barbs or cam-lock quick connects.
• Seals: Viton (B100 biodiesel compatible)
• Self-priming design with reversible flow

Pumphead Specs

• 1″ NPT Female Ports
• 1″ Threaded Barbed Adapters or Tri Clamp
• Close Coupled gears
• No bypass for heavy oils
• Stainless or Cast Iron
• 1 gasket and 1 viton seal(on shaft)
• 14mm shaft
• Includes oversized Lovejoy L075 spider couplings

Motor Specs

• Power: 1.5 HP, single-phase Motor
• Voltage: 115/230 V, 60 Hz (dual voltage ready)
• RPM: 1,725–1,800 RPM for steady torque under load
• 14.5A @12oV, 7.3A@230V
• Enclosure: TEFC (Totally Enclosed Fan Cooled), IP54 dust & water resistant
• Insulation: Class F, VPI impregnated windings for heat & moisture resistance
• Shaft & Bearings: 14 mm keyed shaft, double-sealed ball bearings, with improved drive-end seal
• Service Factor: 1.15, handles overloads with ease
• Starting: Capacitor start / induction run for strong startup torque
• Corrosion Resistance: Anti-rust rotor coating for extended lifespan
• Farm Duty 1.5HP industrial motor
• 6.5 amp draw
• Pre-wired with water resistant switch and 3-prong power cord
• Thermally protected with Manual Override

💲 Investment

• Heavy-duty 1.5 HP TEFC motor with Viton seals
• B100 biodiesel compatibility
• Reversible flow capability
• 1″ ports
• Continuous duty rating
• Comprehensive warranty + professional tech support

ROI: Save 10–30 minutes per transfer. Across multiple jobs daily, that’s significant labor cost savings and increased throughput.

✅ Compatibility

Ideal for:

• Motor Oil
• Waste Motor Oil (WMO)
• Gear Oil
• Hydraulic Fluid

Not for:

• Water
• Highly aqueous solutions
• Highly flammable liquids

🔌 Power Requirements

• Standard 20 amp residential outlet

👉 Add to Cart Now and take control of your oil transfer process with professional-grade speed, reliability, and power.

The post HD Mean Green Oil Pump – 12GPM appeared first on Alternative Fuel Mecca.

• Best Portable Pump for Viscous Fluids: Transfer 8 gallons per minute
• Pump from a Distance: Self-priming design for immediate pumping.  Suction lift is 15′ and push height is 90′.
• Industrial Durability: Built for professional daily use
• Long-Term Reliability: Motor is built to last.  Easy seal replacement and servicing.
• Professional Technical Assistance and Extended Warranty Option

⚙️ Detailed Specifications

Overall Specs

• Dimensions: 17″ × 11″ × 7″
• Weight: 35 lbs
• Temperature Rating: Up to 375 °F
• Flow Rate:  7-8 GPM
• Ports: .75″ NPT with hose barbs or cam-lock quick connects.
• Seals: Viton (B100 biodiesel compatible)
• Self-priming design with reversible flow

Pumphead Specs

• .75″ NPT Female Ports
• Close Coupled gears
• No bypass for heavy oils
• Stainless or Cast Iron
• 1 gasket and 1 viton seal(on shaft)
• 14mm shaft
• Includes oversized Lovejoy L075 spider couplings

Motor Specs

• Power: 3/4 HP, single-phase Motor
• Voltage: 115/230 V, 60 Hz (dual voltage ready)
• RPM: 1,725–1,800 RPM for steady torque under load
• Enclosure: TEFC (Totally Enclosed Fan Cooled), IP54 dust & water resistant
• Insulation: Class F, VPI impregnated windings for heat & moisture resistance
• Shaft & Bearings: 14 mm keyed shaft, double-sealed ball bearings, with improved drive-end seal
• Service Factor: 1.15, handles overloads with ease
• Starting: Capacitor start / induction run for strong startup torque
• Corrosion Resistance: Anti-rust rotor coating for extended lifespan
• Farm Duty 3/4HP industrial motor
• 6.5 amp draw
• Pre-wired with water resistant switch and 3-prong power cord
• Thermally protected with Manual Override

💲 Investment

• Heavy-duty 1 HP TEFC motor with Viton seals
• B100 biodiesel compatibility
• Reversible flow capability
• 3″ ports with stainless barbs
• Continuous duty rating
• Comprehensive warranty + professional tech support

ROI: Save 10–30 minutes per transfer. Across multiple jobs daily, that’s significant labor cost savings and increased throughput.

✅ Compatibility

Ideal for:

• Motor Oil
• Waste Motor Oil (WMO)
• Gear Oil
• Hydraulic Fluid

Not for:

• Water
• Highly aqueous solutions
• Highly flammable liquids

🔌 Power Requirements

• Standard 15 amp residential outlet
• Generator: 3,000 W continuous / 3,500 W peak
• 12 V Inverter: 5,000 W continuous / 6,000 W peak

👉 Add to Cart Now and take control of your oil transfer process with professional-grade speed, reliability, and power.

The post HD Oil Transfer Pump with Bypass – 8GPM appeared first on Alternative Fuel Mecca.

💡 What You Get

• Best Portable Pump for Viscous Fluids: Transfer 7 gallons per minute
• Pump from a Distance: Self-priming design for immediate pumping.  Suction lift is 15′ and push height is 90′.
• Industrial Durability: Built for professional daily use
• Long-Term Reliability: Motor is built to last.  Easy seal replacement and servicing.
• Professional Technical Assistance and Extended Warranty Option

⚙️ Detailed Specifications

Overall Specs

• Dimensions: 17″ × 11″ × 7″
• Weight: 35 lbs
• Temperature Rating: Up to 375 °F
• Flow Rate:  7 GPM
• Ports: .75″ NPT with hose barbs or cam-lock quick connects.
• Seals: Viton (B100 biodiesel compatible)
• Self-priming design with reversible flow

Pumphead Specs

• .75″ NPT Female Ports
• Close Coupled gears
• No bypass for heavy oils
• Stainless or Cast Iron
• 1 gasket and 1 viton seal(on shaft)
• 14mm shaft
• Includes oversized Lovejoy L075 spider couplings

Motor Specs

• Power: 3/4 HP, single-phase Motor
• Voltage: 115/230 V, 60 Hz (dual voltage ready)
• RPM: 1,725–1,800 RPM for steady torque under load
• Enclosure: TEFC (Totally Enclosed Fan Cooled), IP54 dust & water resistant
• Insulation: Class F, VPI impregnated windings for heat & moisture resistance
• Shaft & Bearings: 14 mm keyed shaft, double-sealed ball bearings, with improved drive-end seal
• Service Factor: 1.15, handles overloads with ease
• Starting: Capacitor start / induction run for strong startup torque
• Corrosion Resistance: Anti-rust rotor coating for extended lifespan
• Farm Duty 1/2HP industrial motor
• 6.5 amp draw
• Pre-wired with water resistant switch and 3-prong power cord
• Thermally protected with Manual Override

💲 Investment

• Heavy-duty 3/4 HP TEFC motor with Viton seals
• B100 biodiesel compatibility
• Reversible flow capability
• 1″ ports with stainless barbs
• Continuous duty rating
• Comprehensive warranty + professional tech support

ROI: Save 10–30 minutes per transfer. Across multiple jobs daily, that’s significant labor cost savings and increased throughput.

✅ Compatibility

Ideal for:

• Motor Oil
• Waste Motor Oil (WMO)
• Gear Oil
• Hydraulic Fluid

Not for:

• Water
• Highly aqueous solutions
• Highly flammable liquids

🔌 Power Requirements

• Standard 15 amp residential outlet
• Generator: 3,000 W continuous / 3,500 W peak
• 12 V Inverter: 5,000 W continuous / 6,000 W peak

👉 Add to Cart Now and take control of your oil transfer process with professional-grade speed, reliability, and power.

The post Mean Green Oil Pump – 7GPM appeared first on Alternative Fuel Mecca.

🚀 Move Thick Fluids Fast – Now with a 1 HP Farm Duty Motor! 🔧

In a professional shop, every minute counts. Slow oil transfers don’t just waste time—they impact your bottom line, delay job completion, and keep customers waiting. That’s revenue walking out your door.

Introducing the Heavy Duty 12 GPM Portable Oil Transfer Pump — now powered by a rugged 1 HP Farm Duty motor for superior performance and durability. This industrial powerhouse revolutionizes your oil transfer process.

Since 2009, Alternative Fuel Mecca has been supplying professional-grade equipment to shops nationwide. We understand the demands of daily operations, and we build pumps to keep up.

💡 What You Get

• Best Portable Pump for Viscous Fluids: Transfer 12 gallons per minute (empty a 55-gallon drum in ~5 minutes)
• Pump from a Distance: Self-priming design for immediate pumping.  Suction lift is 15′ and push height is 90′.
• Industrial Durability: Built for professional daily use
• Long-Term Reliability: Motor is built to last.  Easy seal replacement and servicing.
• Professional Technical Assistance and Extended Warranty Option

⚙️ Detailed Specifications

Overall Specs

• Dimensions: 17″ × 11″ × 7″
• Weight: 50 lbs
• Temperature Rating: Up to 375 °F
• Flow Rate:  12 GPM (heavy duty, thick fluids)
• Ports: 1″ NPT with hose barbs or cam-lock quick connects.
• Seals: Viton (B100 biodiesel compatible)
• Self-priming design with reversible flow

Pumphead Specs

• 1″ NPT Female Ports
• 1″ Threaded Barbed Adapters or Tri Clamp
• Close Coupled gears
• No bypass for heavy oils
• Stainless or Cast Iron
• 1 gasket and 1 viton seal(on shaft)
• 14mm shaft
• Includes oversized Lovejoy L075 spider couplings

Motor Specs

• Power: 3/4 HP, single-phase Motor
• Voltage: 115/230 V, 60 Hz (dual voltage ready)
• RPM: 1,725–1,800 RPM for steady torque under load
• Enclosure: TEFC (Totally Enclosed Fan Cooled), IP54 dust & water resistant
• Insulation: Class F, VPI impregnated windings for heat & moisture resistance
• Shaft & Bearings: 14 mm keyed shaft, double-sealed ball bearings, with improved drive-end seal
• Service Factor: 1.15, handles overloads with ease
• Starting: Capacitor start / induction run for strong startup torque
• Corrosion Resistance: Anti-rust rotor coating for extended lifespan
• Farm Duty 1HP industrial motor
• 6.5 amp draw
• Pre-wired with water resistant switch and 3-prong power cord
• Thermally protected with Manual Override

💲 Investment

$965.00 – includes:

• Heavy-duty 3/4 HP TEFC motor with Viton seals
• B100 biodiesel compatibility
• Reversible flow capability
• 1″ ports with stainless barbs
• Continuous duty rating
• Comprehensive warranty + professional tech support

ROI: Save 10–30 minutes per transfer. Across multiple jobs daily, that’s significant labor cost savings and increased throughput.

✅ Compatibility

Ideal for:

• Motor Oil
• Waste Motor Oil (WMO)
• Gear Oil
• Hydraulic Fluid

Not for:

• Water
• Highly aqueous solutions
• Highly flammable liquids

🔌 Power Requirements

• Standard 15 amp residential outlet
• Generator: 3,000 W continuous / 3,500 W peak
• 12 V Inverter: 5,000 W continuous / 6,000 W peak

👉 Add to Cart Now and take control of your oil transfer process with professional-grade speed, reliability, and power.

The post Mean Green Oil Pump – 12GPM appeared first on Alternative Fuel Mecca.

Performance Specs: • Max Flow Rate: 378.5L/min • Max Head: 84m • 304 or 316L Stainless Construction • Warranty: 5 years comprehensive

Core Features: • Corrosion-resistant, sanitary design • Self-priming with leak-free operation • Low maintenance requirements • Customizable configurations (OEM/ODM/OBM) • Tool-free maintenance access • Quick-disconnect fittings

Perfect For: • Food & Beverage Production • Pharmaceutical Manufacturing • Automotive Operations • Biofuel Processing • Marine Applications • Water Treatment • Agricultural Systems

What Sets It Apart: • Medical-grade construction meets stringent industry standards • Versatile enough for harsh industrial environments • Easy cleaning and sanitization • Comprehensive support package included • Full documentation and technical assistance

*Good up to 260*F

*15′ Vertical priming/suction Lift

*2″ Inlet/Outlet Ports

The post Sanitary Diaphragm Pump – Stainless appeared first on Alternative Fuel Mecca.

🚀 Move Thick Fluids Fast – Now with a 1.5 HP Farm Duty Motor! 🔧

In a professional shop, every minute counts. Slow oil transfers don’t just waste time—they impact your bottom line, delay job completion, and keep customers waiting. That’s revenue walking out your door.

Introducing the Heavy Duty 20 GPM Portable Oil Transfer Pump — now powered by a rugged 1 HP Farm Duty motor for superior performance and durability. This industrial powerhouse revolutionizes your oil transfer process.

Since 2009, Alternative Fuel Mecca has been supplying professional-grade equipment to shops nationwide. We understand the demands of daily operations, and we build pumps to keep up.

💡 What You Get

• Best Portable Pump for Viscous Fluids: Transfer 20 gallons per minute (empty a 55-gallon drum in ~2.5 minutes)
• Pump from a Distance: Self-priming design for immediate pumping.  Suction lift is 15′ and push height is 90′.
• Industrial Durability: Built for professional daily use
• Long-Term Reliability: Motor is built to last.  Easy seal replacement and servicing.
• Professional Technical Assistance and Extended Warranty Option

⚙️ Detailed Specifications

Overall Specs

• Dimensions: 17″ × 11″ × 7″
• Weight: 50 lbs
• Temperature Rating: Up to 375 °F
• Flow Rate:  20 GPM (heavy duty, thick fluids)
• Ports: 1″ NPT with hose barbs or cam-lock quick connects.
• Seals: Viton (B100 biodiesel compatible)
• Self-priming design with reversible flow

Pumphead Specs

• 1.5″ NPT Female Ports
• 1.5″ Threaded Barbed Adapters or Tri Clamp
• Close Coupled gears
• No bypass for heavy oils
• Stainless or Cast Iron
• 1 gasket and 1 viton seal(on shaft)
• 14mm shaft
• Includes oversized Lovejoy L075 spider couplings

Motor Specs

• Power: 1.5 HP, single-phase Motor
• Voltage: 115/230 V, 60 Hz (dual voltage ready)
• RPM: 1,725–1,800 RPM for steady torque under load
• 14.5A @12oV, 7.3A@230V
• Enclosure: TEFC (Totally Enclosed Fan Cooled), IP54 dust & water resistant
• Insulation: Class F, VPI impregnated windings for heat & moisture resistance
• Shaft & Bearings: 14 mm keyed shaft, double-sealed ball bearings, with improved drive-end seal
• Service Factor: 1.15, handles overloads with ease
• Starting: Capacitor start / induction run for strong startup torque
• Corrosion Resistance: Anti-rust rotor coating for extended lifespan
• Farm Duty 1.5HP industrial motor
• 6.5 amp draw
• Pre-wired with water resistant switch and 3-prong power cord
• Thermally protected with Manual Override

💲 Investment

• Heavy-duty 1.5HP TEFC motor with Viton seals
• B100 biodiesel compatibility
• Reversible flow capability
• 1″ ports with stainless barbs
• Continuous duty rating
• Comprehensive warranty + professional tech support

ROI: Save 10–30 minutes per transfer. Across multiple jobs daily, that’s significant labor cost savings and increased throughput.

✅ Compatibility

Ideal for:

• Motor Oil
• Waste Motor Oil (WMO)
• Gear Oil
• Hydraulic Fluid

Not for:

• Water
• Highly aqueous solutions
• Highly flammable liquids

🔌 Power Requirements

• Standard 20 amp residential outlet

👉 Add to Cart Now and take control of your oil transfer process with professional-grade speed, reliability, and power.

The post HD Mean Green Oil Pump – 20GPM appeared first on Alternative Fuel Mecca.

• The ability to handle products with entrained air makes SP pumps extremely efficient for emptying tanks and drums.

• Tight manufacturing tolerances and the unique vane-shaped impeller enables SP pumps to handle shear sensitive products efficiently.

• SP pumps are available with either single or double external mechanical seals. • Standard adapters are made of 304 SS to resist corrosion.

*Pumps are in conformance with 3A sanitary standards for centrifugal and positive rotary pumps for milk and milk products, Number 02-10.
SP-Series pumps have a standard 32RA (150 grit) finish, on all product contact surfaces.

The post Low Vibration Sanitary Pump 100GPH appeared first on Alternative Fuel Mecca.

Designed specifically for hot oil or frying oil filtration with a capability of handling temperatures up to 375°F, our pump proudly meets NSF-listing requirements. It’s the ideal companion for a diverse range of commercial fat fryer applications, offering impeccable performance in hot oil cooking, filtering, and waste oil rendering.

Key Features:

– **NSF-Listed Excellence:** Our pumps adhere to NSF-listed standards, including NSF-accepted paint tailored for hot oil cooking applications, ensuring compliance with industry regulations. CE motor

– **Versatile Operation:** Experience the flexibility of bi-directional operation, allowing seamless integration into various processes.

– **Powerful Performance:** With the ability to handle pressures up to 40 PSI (configurable motors) and flow rates reaching 8.2 gallons per minute, this pump delivers unparalleled performance.

– **High-Temperature Resilience:** Operating temperatures up to 375°F make this pump a reliable choice for demanding environments.

– **Efficient Design:** The non-clogging Teflon roller design ensures smooth and hassle-free operation, while suction lift capabilities reach up to 7.5 feet of head.

– **Application Versatility:** While perfect for NSF hot oil applications, this pump is also suitable for non-NSF hot oil scenarios involving non-particulate and non-abrasive fluids compatible with its construction materials.

– **Safety Assured:** AC ODP single-phase motors come equipped with thermal overload protection, providing an added layer of safety.

– **Flexible Installation:** Ports can be conveniently rotated either vertically or horizontally to suit your specific setup.

Please note that the AFM Frying Oil Pump is not intended for use with water-based fluids. Elevate your restaurants with a pump designed for reliability, efficiency, and compliance.

The post Fryer Oil Circulation Pump – Stainless appeared first on Alternative Fuel Mecca.