🚀 Move Thick Fluids Fast – Now with a 1.5 HP Farm Duty Motor! 🔧

In a professional shop, every minute counts. Slow oil transfers don’t just waste time—they impact your bottom line, delay job completion, and keep customers waiting. That’s revenue walking out your door.

Introducing the Heavy Duty 12 GPM Portable Oil Transfer Pump — now powered by a rugged 1 HP Farm Duty motor for superior performance and durability. This industrial powerhouse revolutionizes your oil transfer process.

Since 2009, Alternative Fuel Mecca has been supplying professional-grade equipment to shops nationwide. We understand the demands of daily operations, and we build pumps to keep up.

💡 What You Get

• Best Portable Pump for Viscous Fluids: Transfer 12 gallons per minute (empty a 55-gallon drum in ~5 minutes)
• Pump from a Distance: Self-priming design for immediate pumping.  Suction lift is 15′ and push height is 90′.
• Industrial Durability: Built for professional daily use
• Long-Term Reliability: Motor is built to last.  Easy seal replacement and servicing.
• Professional Technical Assistance and Extended Warranty Option

⚙️ Detailed Specifications

Overall Specs

• Dimensions: 17″ × 11″ × 7″
• Weight: 50 lbs
• Temperature Rating: Up to 375 °F
• Flow Rate:  12 GPM (heavy duty, thick fluids)
• Ports: 1″ NPT with hose barbs or cam-lock quick connects.
• Seals: Viton (B100 biodiesel compatible)
• Self-priming design with reversible flow

Pumphead Specs

• 1″ NPT Female Ports
• 1″ Threaded Barbed Adapters or Tri Clamp
• Close Coupled gears
• No bypass for heavy oils
• Stainless or Cast Iron
• 1 gasket and 1 viton seal(on shaft)
• 14mm shaft
• Includes oversized Lovejoy L075 spider couplings

Motor Specs

• Power: 1.5 HP, single-phase Motor
• Voltage: 115/230 V, 60 Hz (dual voltage ready)
• RPM: 1,725–1,800 RPM for steady torque under load
• 14.5A @12oV, 7.3A@230V
• Enclosure: TEFC (Totally Enclosed Fan Cooled), IP54 dust & water resistant
• Insulation: Class F, VPI impregnated windings for heat & moisture resistance
• Shaft & Bearings: 14 mm keyed shaft, double-sealed ball bearings, with improved drive-end seal
• Service Factor: 1.15, handles overloads with ease
• Starting: Capacitor start / induction run for strong startup torque
• Corrosion Resistance: Anti-rust rotor coating for extended lifespan
• Farm Duty 1.5HP industrial motor
• 6.5 amp draw
• Pre-wired with water resistant switch and 3-prong power cord
• Thermally protected with Manual Override

💲 Investment

• Heavy-duty 3/4 HP TEFC motor with Viton seals
• B100 biodiesel compatibility
• Reversible flow capability
• 1″ ports with stainless barbs
• Continuous duty rating
• Comprehensive warranty + professional tech support

ROI: Save 10–30 minutes per transfer. Across multiple jobs daily, that’s significant labor cost savings and increased throughput.

✅ Compatibility

Ideal for:

• Motor Oil
• Waste Motor Oil (WMO)
• Gear Oil
• Hydraulic Fluid

Not for:

• Water
• Highly aqueous solutions
• Highly flammable liquids

🔌 Power Requirements

• Standard 20 amp residential outlet

👉 Add to Cart Now and take control of your oil transfer process with professional-grade speed, reliability, and power.

The post HD Mean Green Oil Pump – 12GPM appeared first on Alternative Fuel Mecca.

💡 What You Get

• Best Portable Pump for Viscous Fluids: Transfer 7 gallons per minute
• Pump from a Distance: Self-priming design for immediate pumping.  Suction lift is 15′ and push height is 90′.
• Industrial Durability: Built for professional daily use
• Long-Term Reliability: Motor is built to last.  Easy seal replacement and servicing.
• Professional Technical Assistance and Extended Warranty Option

⚙️ Detailed Specifications

Overall Specs

• Dimensions: 17″ × 11″ × 7″
• Weight: 35 lbs
• Temperature Rating: Up to 375 °F
• Flow Rate:  7 GPM
• Ports: .75″ NPT with hose barbs or cam-lock quick connects.
• Seals: Viton (B100 biodiesel compatible)
• Self-priming design with reversible flow

Pumphead Specs

• .75″ NPT Female Ports
• Close Coupled gears
• No bypass for heavy oils
• Stainless or Cast Iron
• 1 gasket and 1 viton seal(on shaft)
• 14mm shaft
• Includes oversized Lovejoy L075 spider couplings

Motor Specs

• Power: 3/4 HP, single-phase Motor
• Voltage: 115/230 V, 60 Hz (dual voltage ready)
• RPM: 1,725–1,800 RPM for steady torque under load
• Enclosure: TEFC (Totally Enclosed Fan Cooled), IP54 dust & water resistant
• Insulation: Class F, VPI impregnated windings for heat & moisture resistance
• Shaft & Bearings: 14 mm keyed shaft, double-sealed ball bearings, with improved drive-end seal
• Service Factor: 1.15, handles overloads with ease
• Starting: Capacitor start / induction run for strong startup torque
• Corrosion Resistance: Anti-rust rotor coating for extended lifespan
• Farm Duty 1/2HP industrial motor
• 6.5 amp draw
• Pre-wired with water resistant switch and 3-prong power cord
• Thermally protected with Manual Override

💲 Investment

• Heavy-duty 3/4 HP TEFC motor with Viton seals
• B100 biodiesel compatibility
• Reversible flow capability
• 1″ ports with stainless barbs
• Continuous duty rating
• Comprehensive warranty + professional tech support

ROI: Save 10–30 minutes per transfer. Across multiple jobs daily, that’s significant labor cost savings and increased throughput.

✅ Compatibility

Ideal for:

• Motor Oil
• Waste Motor Oil (WMO)
• Gear Oil
• Hydraulic Fluid

Not for:

• Water
• Highly aqueous solutions
• Highly flammable liquids

🔌 Power Requirements

• Standard 15 amp residential outlet
• Generator: 3,000 W continuous / 3,500 W peak
• 12 V Inverter: 5,000 W continuous / 6,000 W peak

👉 Add to Cart Now and take control of your oil transfer process with professional-grade speed, reliability, and power.

The post Mean Green Oil Pump – 7GPM appeared first on Alternative Fuel Mecca.

🚀 Move Thick Fluids Fast – Now with a 1 HP Farm Duty Motor! 🔧

In a professional shop, every minute counts. Slow oil transfers don’t just waste time—they impact your bottom line, delay job completion, and keep customers waiting. That’s revenue walking out your door.

Introducing the Heavy Duty 12 GPM Portable Oil Transfer Pump — now powered by a rugged 1 HP Farm Duty motor for superior performance and durability. This industrial powerhouse revolutionizes your oil transfer process.

Since 2009, Alternative Fuel Mecca has been supplying professional-grade equipment to shops nationwide. We understand the demands of daily operations, and we build pumps to keep up.

💡 What You Get

• Best Portable Pump for Viscous Fluids: Transfer 12 gallons per minute (empty a 55-gallon drum in ~5 minutes)
• Pump from a Distance: Self-priming design for immediate pumping.  Suction lift is 15′ and push height is 90′.
• Industrial Durability: Built for professional daily use
• Long-Term Reliability: Motor is built to last.  Easy seal replacement and servicing.
• Professional Technical Assistance and Extended Warranty Option

⚙️ Detailed Specifications

Overall Specs

• Dimensions: 17″ × 11″ × 7″
• Weight: 50 lbs
• Temperature Rating: Up to 375 °F
• Flow Rate:  12 GPM (heavy duty, thick fluids)
• Ports: 1″ NPT with hose barbs or cam-lock quick connects.
• Seals: Viton (B100 biodiesel compatible)
• Self-priming design with reversible flow

Pumphead Specs

• 1″ NPT Female Ports
• 1″ Threaded Barbed Adapters or Tri Clamp
• Close Coupled gears
• No bypass for heavy oils
• Stainless or Cast Iron
• 1 gasket and 1 viton seal(on shaft)
• 14mm shaft
• Includes oversized Lovejoy L075 spider couplings

Motor Specs

• Power: 3/4 HP, single-phase Motor
• Voltage: 115/230 V, 60 Hz (dual voltage ready)
• RPM: 1,725–1,800 RPM for steady torque under load
• Enclosure: TEFC (Totally Enclosed Fan Cooled), IP54 dust & water resistant
• Insulation: Class F, VPI impregnated windings for heat & moisture resistance
• Shaft & Bearings: 14 mm keyed shaft, double-sealed ball bearings, with improved drive-end seal
• Service Factor: 1.15, handles overloads with ease
• Starting: Capacitor start / induction run for strong startup torque
• Corrosion Resistance: Anti-rust rotor coating for extended lifespan
• Farm Duty 1HP industrial motor
• 6.5 amp draw
• Pre-wired with water resistant switch and 3-prong power cord
• Thermally protected with Manual Override

💲 Investment

$965.00 – includes:

• Heavy-duty 3/4 HP TEFC motor with Viton seals
• B100 biodiesel compatibility
• Reversible flow capability
• 1″ ports with stainless barbs
• Continuous duty rating
• Comprehensive warranty + professional tech support

ROI: Save 10–30 minutes per transfer. Across multiple jobs daily, that’s significant labor cost savings and increased throughput.

✅ Compatibility

Ideal for:

• Motor Oil
• Waste Motor Oil (WMO)
• Gear Oil
• Hydraulic Fluid

Not for:

• Water
• Highly aqueous solutions
• Highly flammable liquids

🔌 Power Requirements

• Standard 15 amp residential outlet
• Generator: 3,000 W continuous / 3,500 W peak
• 12 V Inverter: 5,000 W continuous / 6,000 W peak

👉 Add to Cart Now and take control of your oil transfer process with professional-grade speed, reliability, and power.

The post Mean Green Oil Pump – 12GPM appeared first on Alternative Fuel Mecca.

Features:
✧ Permanent magnet and continuous duty.
✧ Built-in pressure switch automatically starts and stops.
✧ Self-priming 3m so pump can be located above water tank.
✧ Runs dry for extended periods of time without damage.
✧ Hold excellent motor keep stable temperature of pump body.

25PSI

4.5A

120V

The post DEF Transfer 12GPM appeared first on Alternative Fuel Mecca.

Pumps at 12GPM

Variable speed controller optional.

The post 24V Oil Pump 3/4HP appeared first on Alternative Fuel Mecca.

Performance Specs: • Max Flow Rate: 378.5L/min • Max Head: 84m • 304 or 316L Stainless Construction • Warranty: 5 years comprehensive

Core Features: • Corrosion-resistant, sanitary design • Self-priming with leak-free operation • Low maintenance requirements • Customizable configurations (OEM/ODM/OBM) • Tool-free maintenance access • Quick-disconnect fittings

Perfect For: • Food & Beverage Production • Pharmaceutical Manufacturing • Automotive Operations • Biofuel Processing • Marine Applications • Water Treatment • Agricultural Systems

What Sets It Apart: • Medical-grade construction meets stringent industry standards • Versatile enough for harsh industrial environments • Easy cleaning and sanitization • Comprehensive support package included • Full documentation and technical assistance

*Good up to 260*F

*15′ Vertical priming/suction Lift

*2″ Inlet/Outlet Ports

The post Sanitary Diaphragm Pump – Stainless appeared first on Alternative Fuel Mecca.

*Dimensions:  17″ long x 11″ wide x 7″ tall (43 cm x 28 cm x 18 cm)
*Weight:  45lbs
*Self Priming
*Suction Height: 15ft
*Push Lift Height: 90ft
*Reversible – Rewire or add a switch to allow dual directional flow!
*Viton Seals
*B100 compatible
*Temperature Rating of 400*F
*Duty Cycle: Continuous
*Priming: Self priming
*12gpm(45 liters/min): 1″ NPT threaded ports, 1.25″ hose barbs
*Pump needs oil to lubricate the gears. Will not work with water.

Motor Specs

*Bolt Pattern: 7 mm holes on a 85 mm circle
*Shaft Size: 14 mm keyed shaft
*Shaft Woodruff Key: 5 mm width x 5 mm deep x 12 mm length
*Viton Seals
*Self Priming
*Cast Iron
*1″ NPT Ports
*Stainless Steel 1.25″ Hose Barbs Included (fits 1.25″ hose kit)
*No Pressure Regulator

Coupling Specs

*Pump Coupling: 5/8″
*Motor Coupling: 14 mm
*Size: C
*Overall Length: 1 63/64″
*Hub Diameter: 1 23/64″
*Bore Depth: 1 3/4″
*Screw Size: 1/4″-20
*Spider Element: Buna-N 27/64″

The post Super HD Heavy Oil Transfer Pump 1.5HP appeared first on Alternative Fuel Mecca.