Plant Master™ Xtreme™ 250 — 1-1/4″ General-Purpose Hose

A flexible, oil-resistant multipurpose hose built for demanding plant and shop service. The Plant Master™ Xtreme™ 250 handles air, water, petroleum-based oils, and lubricants with excellent weather/ozone durability, making it a dependable choice for general industrial transfer. Recommended for petrol, kerosene, and fuel-oil transfer (observe temperature guidance below). (Gates)

Quick Highlights

• Working pressure: 250 psi (1.72 MPa / 17 bar) with 3:1 design factor.
• Temperature range: −40°F to +212°F (−40°C to +100°C) in continuous service; fuels recommended to +120°F max.
• Oil resistance: Tube rated ARPM Class A (high oil resistance).
• Non-conductive: > 1 MΩ per inch when new* (see note on storage/use).
• Excellent flexibility and weather/ozone resistance.

*Electrical resistance can change with storage and use; verify in your application.

---

Typical Uses

• General plant service for air, water, and multi-purpose transfer
• Petroleum oils and lubricants handling
• Fuel transfer (petrol, kerosene, fuel oil) — observe +120°F fuel limit

---

Construction

• Tube: Nitrile (NBR), ARPM Class A oil resistance, black.
• Reinforcement: Synthetic textile braid.
• Cover: Modified nitrile, ARPM Class B; red, standard cover, weather/ozone resistant.

---

Performance & Ratings

• Max working pressure: 250 psi (17 bar / 1.72 MPa)
• Min burst pressure: 900 psi
• Vacuum rating: 10 in Hg
• Min bend radius: 9.84 in (250 mm)
• Temperature range: −40°F to +212°F (−40°C to +100°C) continuous
• Electrical: Non-conductive > 1 MΩ per inch when new*
• Design factor: 3:1 (working : burst)

*Storage and use may adversely affect electrical resistance. Verify before use where non-conductivity is critical.

---

Dimensions (This Variant)

• Inside diameter: 1.25 in (31.8–32 mm)
• Outside diameter: 1.75 in (~44.5 mm)
• Standard length: 300 ft (91 m)
• Approx. weight: ~1.0 lb per foot (as listed per pack; verify before freight calculations)

---

Part & Identification

• Product family: Plant Master™ Xtreme™ 250
• Description: PLANT MAS XTRM 250 1-1/4″ x RL91 (300 ft)
• Product # (Gates): 3205-00049
• Part # (label): 1-1/4X300 PLANT XTREME 250
• UPC: 072053662849 (Gates)

---

Coupling Guidance

Compatible with long-shank styles, Tri-Lokt, interlocking (ground-joint and washer-joint), Power Crimp™ couplings, and GLX® (G44 Series). Always verify assembly compatibility and pressure ratings by size.

---

Compliance / Notes

• ARPM ratings: Tube Class A (high oil resistance); Cover Class B.
• Non-conductive as manufactured; confirm in service due to possible change with age, storage, and media.
• Fuel transfer recommendation to +120°F max.
• Images on the original page are illustrative and may not represent exact product markings.

---

Clean Spec Block (copy-paste friendly)

Plant Master™ Xtreme™ 250 — 1-1/4″ (ID) General-Purpose Hose, 300 ft

• Pressure: 250 psi WP (17 bar); 900 psi minimum burst; 3:1 design factor
• Vacuum: 10 in Hg
• Temp: −40°F to +212°F (−40°C to +100°C) continuous; fuels to +120°F
• ID/OD: 1.25 in (31.8–32 mm) / 1.75 in (44.5 mm)
• Bend radius: 9.84 in (250 mm)
• Tube: NBR, ARPM Class A, black
• Reinforcement: Synthetic textile
• Cover: Modified Nitrile, ARPM Class B, red, weather/ozone resistant
• Electrical: Non-conductive >1 MΩ/in (as new); verify before use
• Length: 300 ft (91 m)
• Weight: ~1.0 lb/ft (per pack listing)
• Part/UPC: 3205-00049 / 072053662849
• Couplings: Long-shank, Tri-Lokt, interlocking (ground-/washer-joint), Power Crimp™, GLX® (G44)
• Applications: Air, water, oils & lubricants; petrol/kerosene/fuel-oil transfer (to +120°F)
• Color: Red cover / black tube

---

If you want, I can also:

• Convert this into a WordPress product page (HTML block with schema.org Product markup).
• Add a comparison table vs. your own hose SKU.
• Generate a cut-sheet PDF with your branding and these specs.